300-710 Exam Dumps Updated | Perfect CCNP 300-710 Study Material

We have updated the 300-710 exam dumps for you and is the perfect 300-710 study material for you to study for the CCNP 300-710 exam. With it, you don’t have to worry about the difficult 300-710 SNCF exam.

Pass4itSure offers the latest 300-710 exam dumps, containing 238 actual questions and answers. You can now visit the webpage https://www.pass4itsure.com/300-710.html to select the latest 300-710 exam dumps.

Securing Networks with Cisco Firepower    
Exam Dumps

Do you know about the 300-710 SNCF exam?

The Cisco 300-710 exam is also known as the 300-710 SNCF (Securing Networks with Cisco Firepower). The exam costs $300 and you need to answer 55-65 questions in 90 minutes with a passing score of 750-850 out of 1000.

Upon successful passing, you will receive Cisco Certified Specialist – Network Security Firepower.

How to pass with better grades? CNP 300-710 exam?

The Cisco 300-710 exam is not easy to pass, which is unanimously recognized. So, it requires a thorough preparation to pass the exam. Pass4itSure updated 300-710 exam dumps can be used as a study material for exam CCNP 300-710 to help you easily achieve high scores and pass the 300-710 exam.

Where are the latest 300-710 dumps pdf available for free download?

We have a free 300-710 dumps pdf for you [google drive] https://drive.google.com/file/d/1K_WLt51dcl9DX2jMYi-eH5MkhIDf7glW/view?usp=share_link

Have you experienced the latest 300-710 SNCF dumps exam questions? Does it really work?

Don’t worry about these questions, we have prepared the latest 00-710 SNCF exam questions 1-13 for you to experience, and the focus is free.

300-710 Free Dumps | 300-710 SNCF | 300-710 Questions Answers | 2022 Updated

New Questions 1

A network security engineer must replace a faulty Cisco FTD device in a high availability pair. Which action must be taken while replacing the faulty unit?

A. Ensure that the faulty Cisco FTD device remains registered to the Cisco FMC
B. Shut down the active Cisco FTD device before powering up the replacement unit
C. Shut down the Cisco FMC before powering up the replacement unit
D. Unregister the faulty Cisco FTD device from the Cisco FMC

Correct Answer: D

New Questions 2

A network engineer is tasked with minimising traffic interruption during peak traffic limes. When the SNORT inspection engine is overwhelmed, what must be configured to alleviate this issue?

A. Enable IPS inline link state propagation
B. Enable Pre-filter policies before the SNORT engine failure.
C. Set a Trust ALL access control policy.
D. Enable Automatic Application Bypass.

Correct Answer: D

New Questions 3

Refer to the exhibit

An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine. What is the problem?

A. The rule must specify the security zone that originates the traffic.
B. The rule Is configured with the wrong setting for the source port.
C. The rule must define the source network for inspection as well as the port.
D. The action of the rule is set to trust instead of allow.

Correct Answer: D

New Questions 4

Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)

C. static routing

Correct Answer: BE

Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660/fptd-fdmrouting.html

New Questions 5

An organization has seen a lot of traffic congestion on their links going out to the internet. There is a Cisco Firepower device that processes all of the traffic going to the internet prior to leaving the enterprise. How is the congestion alleviated so that legitimate business traffic reaches the destination?

A. Create a NAT policy so that the Cisco Firepower device does not have to translate as many addresses.
B. Create a flexconfig policy to use WCCP for application aware bandwidth limiting.
C. Create a QoS policy rate-limiting high bandwidth applications.
D. Create a VPN policy so that direct tunnels are established to the business applications.

Correct Answer: C

New Questions 6

An administrator Is setting up a Cisco PMC and must provide expert mode access for a security engineer. The engineer Is permitted to use only a secured out-of-band network workstation with a static IP address to access the Cisco FMC. What must be configured to enable this access?

A. Enable SSH and define an access list.
B. Enable HTTP and define an access list.
C. Enable SCP under the Access List section.
D. Enable HTTPS and SNMP under the Access List section.

Correct Answer: A

New Questions 7

Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?

A. show running-config
B. show tech-support chassis
C. system support diagnostic-cli
D. sudo sf_troubleshoot.pl

Correct Answer: D

Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technoteSourceFire-00.html

New Questions 8

An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?

A. It is retransmitted from the Cisco IPS inline set.
B. The packets are duplicated and a copy is sent to the destination.
C. It is transmitted out of the Cisco IPS outside interface.
D. It is routed back to the Cisco ASA interfaces for transmission.

Correct Answer: A

New Questions 9

A network administrator notices that SI events are not being updated. The Cisco FTD device is unable to load all of the SI event entries and traffic is not being blocked as expected. What must be done to correct this issue?

A. Restart the affected devices in order to reset the configurations.
B. Redeploy configurations to affected devices so that additional memory is allocated to the SI module.
C. Replace the affected devices with devices that provide more memory.
D. Manually update the SI event entries to that the appropriate traffic is blocked.

Correct Answer: B

New Questions 10

An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks. What must be configured in order to maintain data privacy for both departments?

A. Use passive IDS ports for both departments.
B. Use a dedicated IPS inline set for each department to maintain traffic separation.
C. Use 802.1Q inline set Trunk interfaces with VLANs to maintain logical traffic separation.
D. Use one pair of inline set in TAP mode for both departments.

Correct Answer: C

Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guidev64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html

New Questions 11

Which group within Cisco does the Threat Response team use for threat analysis and research?

A. Cisco Deep Analytics
B. OpenDNS Group
C. Cisco Network Response
D. Cisco Talos

Correct Answer: D

Reference: https://www.cisco.com/c/en/us/products/security/threat-response.html#~benefits

New Questions 12

Which feature within the Cisco FMC web interface allows for detecting, analyzing, and blocking malware in network traffic?

A. intrusion and file events
B. Cisco AMP for Networks
C. file policies
D. Cisco AMP for Endpoints

Correct Answer: B

New Questions 13

A network administrator is seeing an unknown verdict for a file detected by Cisco FTD. Which malware policy configuration option must be selected in order to further analyze the file in the Talos cloud?

A. malware analysis
B. dynamic analysis
C. sandbox analysis
D. Spero analysis

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Reference_a_wrapper_Chapter_topic_here.html

The Pass4itSure 300-710 exam dumps has been updated to be the perfect CCNP 300-710 study material, with which you can easily pass the 300-710 exam. Get the full version of the 300-710 exam questions, here.